Fuel

This under-cowl, inline fuel filter fits many Mercury and Mariner outboards replacing contaminated filters and is mounted under the engine cowl. The translucent plastic-cased filter allows you to check for fuel content and contaminants. Don’t let water moisture or other fuel contaminants rob horsepower from your engine. Filter those particles before they can get to your engine. Used on the 30-40hp EFI FourStroke outboard, the 4-cylinder (996cc) 40-60hp. EFI FourStroke outboards, the 75-115hp FourStroke (1.7L, serial No. 1B366823-2B094995), the 75-115hp FourStroke (2.1L, serial No. 2B094996 and above), the 150hp EFI FourStroke (1B905505 and above) and the 135-300hp. Verado outboards. Manufactor: Mercury

Inline fuel filter 8M0176313 is for on-engine installation on 175-300hp 3.4L V6 and 4.6L V8 4-stroke outboards (serial No. 2B529482 & above). Replace the filter once each season, every 100 engine operating hours and/or as your owner's manual recommends based on engine use. The 10 micron fuel filter removes contaminants, particles and water from your fuel. Prevents harmful debris that may be in the gasoline fuel tank from getting to the engine to rob it of power and efficiency. See your owner's manual or service manual for more information. Manufactor: Quicksilver

Water separating canister element with O-ring and the water sensor unit. For all 1996 and newer Mercury and Mariner V6 EFI outboards. Note that the sensor plus is blue plastic. Check your owner’s manual for inspection and replacement schedules. Manufactor: Mercury

This under-cowl, inline fuel filter fits many Mercury and Mariner outboards replacing contaminated filters and is mounted under the engine cowl. It also fits in specific MerCruiser fuel filter housing. It fits the filter housings for Verado L4, L6 (serial No. 2B144122 and below). It fits 1.5L and 3.0L outboards using a vapor separator system with top screw in filters. It also fits MerCruiser 4.5L and 6.2L engines (serial No. 2A456613 and newer. Manufactor: Mercury

This replacement water separating fuel filter can be used on all Mercury Marine outboards (Mercury, Mariner or Force) and all MerCruiser sterndrive and inboard engines except 1992 MerCruiser 4.3L Gen II engines equipped with an inline fuel filter and not on 1.6L Vazer and 3.0L MPI engines. Don’t let water moisture or other fuel contaminants rob horsepower from your engine. Filter those particles before they can get to your engine. Includes replacement filter and rubber gaskets for installation.

Inline fuel filter 816296Q2 is for use with 5/16" (8mm) inside diameter fuel lines. Don’t let water moisture or other fuel contaminants rob horsepower from your engine. Filter those particles before they can get to your engine. See your engine owner's manual for installation instruction.

A cartridge type of fuel filter element, located under the cowl on outboard engines. Element of fuel filter assembly: 879884T. 30HP 3cyl. & 40‑60 4cyl. EFI FourStroke engines, 0T409000 and above

A cartridge type of fuel filter element, located under the cowl on outboard engines. Element of fuel filter assembly: 879884T. 30HP 3cyl. & 40‑60 4cyl. EFI FourStroke engines, 0T409000 and above

Accessory under cowl kit for Mercury/Tohatsu 4-6hp 2011-. Fits the Mercury/Mariner 4/5/6 hp. FourStroke outboards starting with serial number 0R411838.