Quicksilver

Aluminum anode, fits most Mercury/Mariner outboards 30‑200 hp outboards and all MerCruiser except Bravo. Check for adequate propeller clearance prior to operation. Quicksilver Branded,

This under-cowl, inline fuel filter fits many Mercury and Mariner outboards replacing contaminated filters and is mounted under the engine cowl. The translucent plastic-cased filter allows you to check for fuel content and contaminants. Don’t let water moisture or other fuel contaminants rob horsepower from your engine. Filter those particles before they can get to your engine. Used on the 30-40hp EFI FourStroke outboard, the 4-cylinder (996cc) 40-60hp. EFI FourStroke outboards, the 75-115hp FourStroke (1.7L, serial No. 1B366823-2B094995), the 75-115hp FourStroke (2.1L, serial No. 2B094996 and above), the 150hp EFI FourStroke (1B905505 and above) and the 135-300hp. Verado outboards. Manufactor: Quicksilver

Quicksilver 8M0134466 Fuel Filter fits Mercury 9.9-30hp EFI, serial numbers 0R833820 and above (2017 and newer).

Inline fuel filter 8M0176313 is for on-engine installation on 175-300hp 3.4L V6 and 4.6L V8 4-stroke outboards (serial No. 2B529482 & above). Replace the filter once each season, every 100 engine operating hours and/or as your owner's manual recommends based on engine use. The 10 micron fuel filter removes contaminants, particles and water from your fuel. Prevents harmful debris that may be in the gasoline fuel tank from getting to the engine to rob it of power and efficiency. See your owner's manual or service manual for more information. Manufactor: Quicksilver

This under-cowl, inline fuel filter fits many Mercury and Mariner outboards replacing contaminated filters and is mounted under the engine cowl. It also fits in specific MerCruiser fuel filter housing. It fits the filter housings for Verado L4, L6 (serial No. 2B144122 and below). It fits 1.5L and 3.0L outboards using a vapor separator system with top screw in filters. It also fits MerCruiser 4.5L and 6.2L engines (serial No. 2A456613 and newer. Don’t let water moisture or other fuel contaminants rob horsepower from your engine. Filter those particles before they can get to your engine. Manufactor: Quicksilver

This replacement water separating fuel filter can be used on all Mercury Marine outboards (Mercury, Mariner or Force) and all MerCruiser sterndrive and inboard engines except 1992 MerCruiser 4.3L Gen II engines equipped with an inline fuel filter and not on 1.6L Vazer engines. Don’t let water moisture or other fuel contaminants rob horsepower from your engine. Filter those particles before they can get to your engine. Includes replacement filter and rubber gaskets for installation.

Grease for propeller shaft with Teflon for outboards, 227g

For use with 5/16" (8 mm) I.D. hose and applications requiring a 1/4" NPT thread. Threads into our portable fuel tanks and will also work with our water separating filter bracket. A .250 inch ID brass fitting for use with gasoline fuel only. This material should not be used with diesel fuels.

This replacement water separating fuel filter can be used on all Mercury Marine outboards (Mercury, Mariner or Force) and all MerCruiser sterndrive and inboard engines except 1992 MerCruiser 4.3L Gen II engines equipped with an inline fuel filter and not on 1.6L Vazer and 3.0L MPI engines. Don’t let water moisture or other fuel contaminants rob horsepower from your engine. Filter those particles before they can get to your engine. Includes replacement filter and rubber gaskets for installation.

A cartridge type of fuel filter element, located under the cowl on outboard engines. Element of fuel filter assembly: 879884T. 30HP 3cyl. & 40‑60 4cyl. EFI FourStroke engines, 0T409000 and above

Clip‑on style. A double sealed clip‑on type disconnect for the fuel tank end and fits a 5/16" (8mm) I.D. fuel line

Power Trim & Steering Fluid 858075Q01 is a 32 oz bottle of quality hydraulic steering fluid for all marine power trim and steering systems except electric power steering systems that require synthetic fluid or non power hydraulic steering systems requiring hydraulic helm steering fluid.

Quicksilver Power Tune© is recommended to assist in restoring lost power due to carbon, gum and varnish deposits that accumulate in the combustion chambers of gasoline engines. These deposits are the result of normal engine use, low temperature operation and the use of some fuels. Removing these deposits helps improve fuel/air flow and overall engine performance.

Quickstor Fuel System Treatment and Stabilizer 8M0047922 is for use in all 2‑ and 4‑cycle carbureted and fuel‑injected gasoline engines including cars, trucks, motorcycles, ATVs, snowmobiles, marine engines, lawn mowers, chain saws, string trimmers and snow blowers. Safe for catalyzed engines. Add to fuel before long-term boat storage. Stabilizes fuel for up to 1 year. One ounce treats 5 gallons. Prevents regular and ethanol blended fuel from breaking down and oxidizing. Prevents fuel system corrosion. Prevents gum and varnish from forming in the fuel and then settling in fuel lines, tanks, carburetor and injectors.

Propeller Tab washer and nut Mercury outboards 75 HP and up and Mercruiser Alpha and Bravo 1 sterndrives

Clearcoat used as a final layer after painting your Mercury engine cover