Påhengsmotordeler

Aluminiumbrickan som sitter på urtappningspluggen för motoroljan till dom flesta Suzuki 4-t DF båtmotorer. Mått: 12.5X20X2.5

Flo-Torq SSR Solid Propeller Hub Kit 8M0101603 fits select 200 hp through 400 hp Mercury FourStroke outboards with 1.25" propeller shafts. The SSR hub utilizes Quicksilver's proven Soft-Shift rubber technology to prevent shifting noise, vibration and harshness. SSR technology provides 22-23% reduction in shift event noise virtually eliminating shift clunk. Each kit includes the SSR drive sleeve, three-washer set (washer, thick washer and cupped Belleville washer), tabbed lock washer and locking prop nut. Installation is quick and easy with the Quicksilver floating prop wrench and Quicksilver Prop Block or common shop tools. Mercury FourStroke outboards with serial numbers lower than 2B244273 must see your dealer for an updated engine calibration before using this hub kit. 40 hp CT through 225 hp Mercury FourStroke outboards with 1" diameter propeller shafts used in general purpose and non-surface piercing propeller application installations use the SSR hub kit 8M0150152. 40 hp CT through 225 hp Mercury FourStroke outboards with 1" diameter propeller shafts used in high performance and/or surface piercing installations and 250 hp through 350 hp Mercury FourStroke outboards, use the SSR Solid hub kit 8M0101604.

Aluminum anodes to Mercury/Mariner: 40‑60HP EFI FourStroke BigFoot/Command Thrust only, 75‑115HP EFI FourStroke (1B366823‑2B094995), 75‑115HP EFI FourStroke (2B094996 and Up) Standard gearcase model only.. Mercury OEM

For use with 5/16 in. (8 mm) I.D. fuel line

Mercury/Mariner Flush kit will allow for running at idle speeds. Attaches to the water intakes; provides a fresh water connection when flushing the cooling system or operating the engine.

Replacement oil filter for Mercury and Mariner 8hp and 9.9hp 4-stroke outboards, 15hp and 20hp 4-stroke carbureted outboards and the 25hp and 30hp EFI 4-stroke outboards (model year 2006 and newer).

Vanlig packning till på- och urtappning av växelhusolja till Suzuki utombordare (Sitter även som packning för motoroljan på vissa mindre modeller, tex DF2.5). Passar bland annat till Suzuki DF40/50/60 & DF110, 115 & 140. Dessa packningar rekommenderas att bytas vid varje oljebyte dvs en gång per år. Säljes per styck så beställa 2st vid oljebyte.

Propeller nut kit to fit many models of Mercury/Mariner 70 HP+ (with non Flo-Torq II hubs)

Suzuki originalpropeller som passar till DF100-115A modeller

Replaces NGK BUHW, standard spark plug for older Mariner and Mercury outboards.

Aluminum anodes ‑ For use in saltwater or freshwater. This is a complete anode kit to replace all factory installed anodes found on the transom and gearcase. Fasteners are included. Fits Mercury/Mariner: 75‑115HP EFI FourStroke (2B094996 and Up) BigFoot and Command Thrust gearcase only, 150HP EFI FourStroke (1B905505 and Up).

Bolt kit includes 4 pcs of 3 1/2" bolts, washers and nuts

En bränsleblåsa med 6 mm anslutning är ett enkelt och effektivt sätt att snabbt pumpa fram bränsle till din motor. Den är tillverkad av slitstarkt, flexibelt gummi som tål bensin, diesel och etanolblandade bränslen. Med inbyggd backventil säkerställs att bränslet bara går i en riktning och förhindrar att luft kommer in i systemet.

Bränslefilter (10 Micron) med vattenavskiljare. Passar DF8A-300AP, DT9.9A-40W/WR/WK. 3/8" nipplar ingår. Max 117 l/h

Provides a front water pick‑up seal for gearcases with dual water pick‑ups

Gasket for the oil plug for gear case that fits Suzuki DF models. Sold per piece.