Service Kit 100hr Mercury 135-150hp 3.0L 4-t

Mercury High Performance Gear Lube 8M011677 is 85W90 weight for use in outboard and sterndrive racing applications. Also for use in high‑performance gearcases used in marine, powersports, and motorsports applications. Provides maximum protection against wear. Its tackifiers and pressure additives improve oil film adhesion and protect against excessive wear. Helps prevent horsepower loss and won’t break down when gears reach high temperatures. Advanced emulsifiers protect gears if water enters the gear housing. Should be changed once each year when winterizing the engine or every 100 hours of operation.

The Quicksilver Gear Lube Pump Outboard or sterndrive 3/8" - 16 Drain Plug. Easily replace your lower unit oil with this pump. Fits all quart and liter bottles. Fits any outboard or sterndrive with a 3/8"‑16 drain plug. Use adapter (included) for gear cases with an M8x1.25 drain plug.

Four stroke synthetic blend oil is recommended for use in all four stroke outboards to 150 hp, 3.4L V-6 outboards and 4.6L V-8 outboards. It is SAE 10W30 weight oil. Provides outstanding wear and corrosion protection to help extend engine life. See your owner's manual or service manual for specific applications and instructions.

Mercury Full Synthetic 4-Stroke Marine Engine Oil 8M0206998 is for use in non-catalyzed 4-stroke outboard, sterndrive and inboard engines. This is a one gallon bottle. Quicksilver 10W-30 Full Synthetic features a specialized additive package with elements that protect hard-working marine engines. It protects internal engine surfaces from deposit buildup, neutralizes harmful byproducts of fuel combustion and provides industry leading defense against rust during intermittent engine use. It exceeds NMMA® FC-W® standards for non-catalyzed outboard, sterndrive and inboard engines.

Mercury Full Synthetic 4-Stroke Marine Engine Oil 8M0206997 is for use in non-catalyzed 4-stroke outboard, sterndrive and inboard engines. This is a one gallon bottle. Quicksilver 10W-30 Full Synthetic features a specialized additive package with elements that protect hard-working marine engines. It protects internal engine surfaces from deposit buildup, neutralizes harmful byproducts of fuel combustion and provides industry leading defense against rust during intermittent engine use. It exceeds NMMA® FC-W® standards for non-catalyzed outboard, sterndrive and inboard engines.

Oil filter, low & high pressure fuel filter, gearcase drain seal, 4‑spark plugs, thermostat kit, water impeller kit, belt, 2‑lower unit anodes and power trim anode 150HP EFI 4 Stroke

Aluminum anode that provides additional clearance for high rake propellers. Fits Mercury/Mariner 35‑300hp, Force 90 & 120hp 1995 and newer, MerCruiser Alpha One Gen II and Bravo I, II, III, X XR & XZ drives.

Aluminum anodes ‑ For use in saltwater or freshwater. This is a complete anode kit to replace all factory installed anodes found on the transom and gearcase. Fasteners are included. Fits Mercury/Mariner: 75‑115HP EFI FourStroke (2B094996 and Up) BigFoot and Command Thrust gearcase only, 150HP EFI FourStroke (1B905505 and Up).

Aluminum. Located on the bottom of the external power trim assembly. Fits the 150 Hp. EFI FourStroke outboard, 1B905505 and above.

Water Pump Repair Kit for Mercury 75-150hp 4-stroke Outboards. Recommended replacement interval for impeller is 300 hours or every 3 years.

Spark plug NGK ZFR5F, check and set gap per owner's manual or the emissions control information decal if present. Fits Mercury 75-90-115 HP 4-stroke 2B094996 & up, 75-90-115/115 PRO XS HP FOURSTROKE 2B094996 & up and 150 EFI FOURSTROKE 1B905505 & up

Includes thermostat and housing that fits Mercury 75-90-115 HP FOURSTROKE 1B366823 & up, 75-90-115/115 PRO XS HP FOURSTROKE 2B094996 & up, 150 EFI FOURSTROKE 1B905505 & up

In‑line, under cowl fuel filter Inline fuel filter. Prevents harmful debris that may be in the gasoline fuel tank from getting to the engine to rob it of power and efficiency. Used on the 75‑115HP & 115HP ProXs 2.1L EFI FourStroke (2B094996 & above), 150HP EFI FourStroke (1B905505 & above), 200‑600HP L6 Verado (2B141124 & above), 350‑400HP 5.7L V10 Verado ( 3B266064 & above), 500‑600HP 7.6L V12 Verado (3B060047 & above)

This under-cowl, inline fuel filter fits many Mercury and Mariner outboards replacing contaminated filters and is mounted under the engine cowl. The translucent plastic-cased filter allows you to check for fuel content and contaminants. Don’t let water moisture or other fuel contaminants rob horsepower from your engine. Filter those particles before they can get to your engine. Used on the 30-40hp EFI FourStroke outboard, the 4-cylinder (996cc) 40-60hp. EFI FourStroke outboards, the 75-115hp FourStroke (1.7L, serial No. 1B366823-2B094995), the 75-115hp FourStroke (2.1L, serial No. 2B094996 and above), the 150hp EFI FourStroke (1B905505 and above) and the 135-300hp. Verado outboards. Manufactor: Quicksilver

Aluminiumanod Mercury. Ligger i sidofickor på växelhuset precis ovanför kavitationsplattan. Passar Mercury/Mariner 30-300hk utombordare och passar även Force 90 & 120hk 1995 och nyare utombordare.

Service Kit 100hr Mercury for 150HP EFI 4 Stroke, kit include: oil filter, low & fuel filter, gearcase drain seal.