Service Kit 300hr Mercury 200-300hp L6 4-t

Mercury High Performance Gear Lube 8M011677 is 85W90 weight for use in outboard and sterndrive racing applications. Also for use in high‑performance gearcases used in marine, powersports, and motorsports applications. Provides maximum protection against wear. Its tackifiers and pressure additives improve oil film adhesion and protect against excessive wear. Helps prevent horsepower loss and won’t break down when gears reach high temperatures. Advanced emulsifiers protect gears if water enters the gear housing. Should be changed once each year when winterizing the engine or every 100 hours of operation.

The Quicksilver Gear Lube Pump Outboard or sterndrive 3/8" - 16 Drain Plug. Easily replace your lower unit oil with this pump. Fits all quart and liter bottles. Fits any outboard or sterndrive with a 3/8"‑16 drain plug. Use adapter (included) for gear cases with an M8x1.25 drain plug.

Clean oil is essential in reducing friction and preventing damage to internal components, providing many years of engine life. Engineered for sterndrive and outboard applications, this 4-stroke synthetic blend 25W-40 marine engine oil has been extensively tested to ensure impressive protection against corrosion and wear. Exceeds all marine industry 4-stroke oil requirements including FC-W and FC-W Catalyst Compatible. 4L package.

Clean oil is essential in reducing friction and preventing damage to internal components, providing many years of engine life. Engineered for sterndrive and outboard applications, this 4-stroke synthetic blend 25W-40 marine engine oil has been extensively tested to ensure impressive protection against corrosion and wear. Exceeds all marine industry 4-stroke oil requirements including FC-W and FC-W Catalyst Compatible. 1L package.

Oil filter, fuel filter, oil drain seal and 2‑gearcase drain seals (Fits models s/n: 2B144123-2B578935)

Aluminum anode that provides additional clearance for high rake propellers. Fits Mercury/Mariner 35‑300hp, Force 90 & 120hp 1995 and newer, MerCruiser Alpha One Gen II and Bravo I, II, III, X XR & XZ drives.

Aluminum anode, placed on Power Trim unit. Fits: 200‑350hp L6 Verado, 250‑300 hp V8 (4.6L) Verado SeaPro FourStroke outboards.

Aluminum anode. Located in side pockets on the gearhousing just above the cavitation plate. Fits Mercury/Mariner 30‑300hp outboards and also fits Force 90 & 120hp 1995 and newer outboards.

In‑line, under cowl fuel filter Inline fuel filter. Prevents harmful debris that may be in the gasoline fuel tank from getting to the engine to rob it of power and efficiency. Used on the 75‑115HP & 115HP ProXs 2.1L EFI FourStroke (2B094996 & above), 150HP EFI FourStroke (1B905505 & above), 200‑600HP L6 Verado (2B141124 & above), 350‑400HP 5.7L V10 Verado ( 3B266064 & above), 500‑600HP 7.6L V12 Verado (3B060047 & above)

This under-cowl, inline fuel filter fits many Mercury and Mariner outboards replacing contaminated filters and is mounted under the engine cowl. The translucent plastic-cased filter allows you to check for fuel content and contaminants. Don’t let water moisture or other fuel contaminants rob horsepower from your engine. Filter those particles before they can get to your engine. Used on the 30-40hp EFI FourStroke outboard, the 4-cylinder (996cc) 40-60hp. EFI FourStroke outboards, the 75-115hp FourStroke (1.7L, serial No. 1B366823-2B094995), the 75-115hp FourStroke (2.1L, serial No. 2B094996 and above), the 150hp EFI FourStroke (1B905505 and above) and the 135-300hp. Verado outboards. Manufactor: Quicksilver

Water separating canister element with O-ring for the water sensor plug. For Verado V6 outboards Gen 5 (serial No. 2B144123 and above) equipped with Fuel Supply Module (FSM) systems. Check your owner’s manual for inspection and replacement schedules.

For Mercury Optimax 75 hp through 115 hp 2-stroke outboards and Mercury 30 hp through 350 hp 4-stroke outboards, and MerCruiser Alpha One Gen II and Vazer sterndrives. See your owner’s manual for replacement schedule.

Water Separating and Sensing Fuel Filter Kit 8M0157708 features a 10-micron filter to remove performance robbing water and other contaminants from gasoline for your main mover/propulsion engines and onboard generator. Removing water from fuel helps prevent water from damaging internal components of the fuel system. Designed for Mercury outboards that utilize a boat mounted fuel filter. It can also be used on other outboard

Thermostat housing, 60°C. The additional seals, gaskets, clamps and attaching hardware sold separately. See your owner's manual or service manual for more information. 135‑175hp L4, 200‑400hp L6, and 400R L6 FourStroke outboards.

Alternator belt that fits Mercury Verado L4 & L6 engines (line 4 & 6 cyl)

Oil filter, spin‑on fuel filter, high pressure fuel filter screen, oil drain seal, 2‑gearcase drain seals, 6‑spark plugs, thermostat kit, water impeller kit, belt and anode kit. Fits Mercury L6 Verado 200-300hp FourStroke (2B144123 and above)